High End Systems Cyberlight, Руководство пользователя

Страница: 44 / 147

Chapter 1 Installation and Setup 1-27
1
Rear Panel LED Indicators
Table 1-3 lists the meanings of the information and status LEDs located on Cyberlight fixture’s rear
panel. Refer back to Figure 1-1 earlier in this chapter for the location of the rear panel LEDs.
If you believe that the LEDs are indicating a problem situation, or if you are experiencing problems
with your fixture, see the section titled “Troubleshooting” on page 2-12.
Table 1-3: Description of Cyberlight Rear Panel LEDs
LED Name LED Color Description
info red (blinks) Provides fixture status information. See
“Switches 3, 4, and 5: Information Mode” on
page 1-24.
motor green Normal.
off Check power supply board fuses as shown in
“Replacing Power Supply Fuses” on page
3-15.
lamp steady
yellow Normal.
flashing
yellow
(1 flash/
sec) Lamp failed to strike. See “Troubleshooting”
on page 2-12.
rapid
flashing Over-temp condition. See “Troubleshooting”
on page 2-12.
off Timed out from loss of data.
fan red Normal.
off Fans have automatically shut off.
xmit yellow The fixture is transmitting data back to a
controller.
off No data is being transmitted.
recv green The fixture is receiving data from a controller.
off No data is being received.