High End Systems Cyberlight, Руководство пользователя

Страница: 100 / 147

Appendix A DMX Control of Cyberlight A-7
A
DMX 512 Mode 2 – Enhanced Cyberlight
®
DMX
Control
Each Cyberlight fixture in DMX mode 2 uses 20 channels of the DMX 512 protocol thus providing control
for up to 25 fixtures (512 / 20 = 25.6 fixtures). Use the procedure below to control your Cyberlight with
DMX mode 2:
1. Set the Cyberlight fixture to DMX mode 2 by setting address switch 7 to ON and address switch 8 to
OFF.
2. Set address switches 1 through 5 to correspond to the desired fixture number, as shown in Table A-3.
Note that Cyberlight CX fixtures configured for 20-channel mode work properly and can be mixed with
Cyberlight fixtures; they do not respond to the color mixing, zoom, and frost constructs.
3. Refer to Table A-4 for the Cyberlight DMX mode 2 channel assignments.
Table A-3: Addressing Fixtures in 20 Channel DMX 512 Mode 2
Cyberlight
Fixture
Fixture
Address
Switches ON
DMX Channel
Number
Cyberlight
Fixture
Fixture
Address
Switches ON
DMX Channel
Number
Fixture 1 none 001 Fixture 14 1, 3, and 4 261
Fixture 2 1 021 Fixture 15 2, 3, and 4 281
Fixture 3 2 041 Fixture 16 1, 2, 3, and 4 301
Fixture 4 1 and 2 061 Fixture 17 5 321
Fixture 5 3 081 Fixture 18 1 and 5 341
Fixture 6 1 and 3 101 Fixture 19 2 and 5 361
Fixture 7 2 and 3 121 Fixture 20 1, 2, and 5 381
Fixture 8 1, 2, and 3 141 Fixture 21 3 and 5 401
Fixture 9 4 161 Fixture 22 1, 3, and 5 421
Fixture 10 1 and 4 181 Fixture 23 2, 3, and 5 441
Fixture 11 2 and 4 201 Fixture 24 1, 2, 3, and 5 461
Fixture 12 1, 2, and 4 221 Fixture 25 4 and 5 481
Fixture 13 3 and 4 241