1-28
Cyberlight
User Manual
Putting the Fixture Into Use
Before putting the Cyberlight fixture into use, you need to do the following:
•
Make sure the Cyberlight power cord cap is wired correctly.
•
Make sure the Cyberlight is set for the correct voltage. Appendix D contains a listing of
typical voltages worldwide. You should always verify the proper voltage with a local authority
in your venue.
•
Make sure you configured the fixture properly as described in this chapter.
•
If you are connecting the fixture to a controller, see Chapter 2. If you are controlling the
Cyberlight with DMX 512 protocol, also see Appendix A (for DMX 512 control).
•
See the section titled “Mounting the Fixture” on page 2-9.
•
Heed all of the warnings below:
WARNINGS:
•
Do not mount on a flammable surface.
•
Maintain minimum distance of 1.0 meter (3.28 feet) from
combustible materials.
•
Observe minimum distance to lighted objects of 1.0 meter (3.28
feet).
•
This equipment for connection to branch circuit having a
maximum overload protection of 20 A.
•
Equipment suitable for dry locations only. Do not expose this
equipment to rain or moisture.
•
Refer servicing to qualified personnel; no user serviceable parts
inside.
•
Class I Equipment - this fixture employs a grounded type
receptacle and is not intended for connection to a two wire,
ungrounded source of supply.
•
Heed all other Cautions and Warnings in this manual and printed
on fixture labels.
Содержание Cyberlight
Страница 123: ...C 8 Cyberlight User Manual...
