Hewlett Packard Enterprise ProLiant DL20 Gen10, Руководство по техническому обслуживанию и ремонту

Страница: 81 / 153

a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
4. Disconnect all peripheral cables from the server.
5. Remove the server from the rack.
6. Remove the access panel.
7. If installed, remove the Smart Array modular controller (AROC).
8. Remove an energy pack.
9. Remove the energy pack holder.
To replace the component, reverse the removal procedures.
Removing and replacing the chassis intrusion detection switch
Procedure
1. If installed, remove the front bezel.
2. Power down the server.
3. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
4. Disconnect all peripheral cables from the server.
5. Remove the server from the rack.
6. Remove the access panel.
7. Remove the chassis intrusion detection switch on the DIMM guard:
Removal and replacement procedures
81