Hettich BlueMax Mini Modular Plus, Руководство по эксплуатации

Страница: 43 / 88

43
Fig. 35: Tools used (drill bits)
1
2
3
6
5
4
Fig. 37: Interchangeable drilling units
Fig. 36: Premounted drill bits
Fig. 38: Interchangeable drilling unit, 6, 3 spindles
32 32 32 32 32 32 32 32
256
L
R
L
R
L
R
L
R
L
Drilling pattern
Push pre-mounted tool
4
into tool holder
of interchangeable drilling unit
5
and
turn in opposite direction of drilling-unit
rotation.
The bayonet chuck engages.
Repeat this process until all tools
are securely engaged.
Always close off unneeded tool holders
with a dummy plug
6
.
Always check your work before fitting
the interchangeable drilling unit.
The drill bits must engage and all screws
must be tight.
NOTE
Pay attention to colour marking!
Drill bits marked red must be used for spindles turning
anticlockwise.
Interchangeable drilling unit, 6 spindles, interchangeable
drilling unit, 3 spindles (Selekta 22/9)
This interchangeable drilling unit is used for drilling receiving
holes and for inserting hinges and connecting fittings.
Fit tools (drill bits) on a work bench.
Interchangeable drilling unit, 9 spindles
This interchangeable drilling unit is used for creating hole
lines.
Drill bits marked black must be used for spindles turning
clockwise.
Fig. 39: Interchangeable drilling unit, 9 spindles
32
52
5,5
32 32
R
L
R
R
R
R
52
9
R
L L
Drilling pattern
3 spindles
Drilling pattern
6 spindles
32
52
5,5
32 32
R
L
R
R
R
R
52
9
R
L L
Drilling pattern
3 spindles
Drilling pattern
6 spindles