Hettich BlueMax Mini Modular Plus, Руководство по эксплуатации, Страница: 2 / 88

22
Contents
1. Foreword
1. Introduction 5
2. Important advice 5
Revision service 5
Updating 5
3. Validity of this operating manual 5
Application 5
Copyright reserved 5
4. Owner's personal responsibility 5
5. Service 5
2. EC declaration and protocols
1. EC Declaration of Conformity 6
2. Important note 7
3. Verification of instruction 7
3. General safety rules
1. Information on signs, symbols and markings 8
2. General 9
3. Safety advice for the user company 10
4. Noise 10
5. Oils, greases and other chemical substances 10
6. Residual risk 10
7. Safety advice for operating personnel 11
8. Safety advice for operating the machine 11
9. Safety advice for carrying out maintenance work 11
10. Training / instruction 11
11. Personal protective equipment 12
4. Purpose / operating principle
1. General information 14
2. Intended use 14
3. Foreseeable incorrect use 14
4. Operating principle and description of the machine 15
Description of the machine 15
5. Rating plate 15
6. Limit values 15
7. Liability 15
5. Technical information
1. Safety advice 16
2. Attachment points 16
3. Technical specifications 17
4. Equipment 18
Setting 22
5. Safety guards 22
6. Noise mission 23
7. Aligning / fastening 23
General information 23
8. Connections required 23
Main power connection 23
Compressed air connection 23
9. Handling 23
Transportation via fork lift truck or pallet jack 24
10. Internal handling 24
11. Checking delivery for missing items 24
12. Dealing with shipping damage 24
13. Measures for temporary storage 24
14. Site of installation 24
15. Safety guards to be provided by the owner 25
16. Permissible ambient conditions 25
17. Removing preservatives 25
18. Electrics 25
19. Compressed air connection 25
20. Suction extractor 25
6. Start up / trial run
1. General 27
2. Safety check 27
3. Malfunctions on start up 27
4. Starting up for the first time 27
5. Machine versions supplied 28
6. Interchangeable drilling units 29
Interchangeable drilling unit, 3 spindles Selekta 29
Interchangeable drilling unit, System 32 hole line 29
Interchangeable drilling unit, System 32 hole line 90° 29
7. Other accessories 29
8. Assemblies 30
Press in frame for the interchangeable drilling unit, 6 spindles 30
Centre stop 31
Continuation stops 31
Drilling depth settings 32
Drum stop 33
Hold-down clamps 33
Converting from manual operation to foot switch 34
Connecting foot switch for a machine with horizontal
drilling unit 34
Connecting foot switch for a machine without
horizontal drilling unit 35
9. Carrying out trial run 36
10. Concluding start up 36
7. Setting up
1 . Preparing machine 38
Readiness for use 38
Connecting to extractor system 38
Connecting to compressed air supply 39
Connecting to power supply 39
Switching on 40
Operating 40
Drilling hole line, interchangeable drilling unit, 9 spindles 41
Inserting hinges 42
2. Setting up (preparing for work) 42
Tools used (drill bits) 42
Interchangeable drilling unit, 6 spindles,
interchangeable drilling unit, 3 spindles (Selekta 22/9) 43
Interchangeable drilling unit, 9 spindles 43
Interchangeable drilling unit, 90°, 9 spindles 44
Changing interchangeable drilling units 44
Cleaning 44
Fitting drilling units 45
Checking switch for proper working order 45
Setting drilling depth, vertical drilling unit 46
Drilling with horizontal drilling unit 46
Settings on the back of the machine 47
Limiting drilling stroke for drilling hole lines 48
3. Hold-down clamps and centre stop 48
Hold-down clamps 48
Centre stop 49
Setting the drum stops 49
Pendulum stops 49
8. Operation
1. Safety check 50
General information 50
Readiness for use 50
Controls 51
2. Switching on 52
Preparatory work 52
3. Operating 52
Hold-down clamps 53
Fitting Hettich hinges 53
Drilling 54
Pressing in 54
4. Malfunctions during operation 55
Troubleshooting 55
5. Checks during operation 55
Checks for proper working order 55