manualshive.com logo in svg

Hettich BlueMax Mini Modular Plus, Руководство по эксплуатации, Страница: 52 / 88

Поделиться
Скачать
Hettich BlueMax Mini Modular Plus Скачать руководство пользователя страница 52

52

1

3

2

Operation

2.  Switching on
  Preparatory work

• 

 

Connect to the power supply by plugging in the mains plug,

• connect to compressed-air supply, switch this on and
• 

 

prepare material: panels, hinges / connectors etc.

3. Operating

 

You can operate the machine either by foot switch or 

pushbutton on the control unit. The machine cannot be 

operated via foot switch and pushbutton at the same time.

 

Turn on the power supply for the drive motor at main switch 

1

.

 

The same functions are given for foot switch 

2

 and 

pushbutton 

3

 on the control unit.

 

Both controls must remain pressed until a complete work 

operation has been completed.

 

If you release the pushbutton or foot switch beforehand, the 

machine will abort the work operation and the drilling unit 

will return to the home position.
You must re-start the process.

Содержание BlueMax Mini Modular Plus

























































































Отзывы:

Нет отзывов