Hettich BlueMax Mini Modular Plus, Руководство по эксплуатации

Страница: 86 / 88

86
Continuation stops - Precision adjustment
1. Precision adjustment on Y axis via hexagon head screw
Produce hole line drilling and push continuation stop
into hole line boring
3
. Push workpiece towards machine
centre so that the outer edge of drill hole
4
rests against
the continuation stop. Now tighten screws
5
2. Precision adjustment on X axis via hexagon socket screws
Undo the hexagon socket screws
6
and align the
continuation stop flush with the cross member
7
. Carry
out test drilling
7
. Using a sliding calliper, measure the
distance between both drill holes. The distance from
outer edge to outer edge of both drill holes
9
must be 69
mm. If the distance is not correct, the X direction can be
adjusted via the small hexagon socket screw
0
(1 turn =
0.8 mm). Carry out another test drilling and remeasure the
distance between both drill holes.
NOTE!
Accurate settings will give you good quality results.
Instructions for installing optional accessories
5. Installing support block
The support blocks are screwed into the base profile at the
left and right side by means of a clamping stone. First insert
the sliding block into the profile and move to the required
position. Then screw the support block into the sliding block
using the hexagon socket screws.
Machine centre Machine centre
3
4
8
6
7
0
9