Hettich BlueMax Mini Modular Plus, Руководство по эксплуатации

Страница: 24 / 88

24
Technical information
Transportation via fork lift truck or pallet jack:
If fork lift trucks or hand pallet jacks are used for loading or
unloading, they must be in proper working order and suitable
for carrying the weights that are involved.
Attention must always be paid to the
centre of gravity of the item being moved!
During transportation, the machines must be properly
secured; the load must be evenly distributed. Avoid jerky
movements.
Set the machine down without bumps or jolts as well as in an
upright standing position. Take immediate action to prevent these
from being damaged by transportation vehicles and from tipping
over. On unloading, handling and keeping the machine in
temporary storage, treat it with the greatest possible care and
protect it from the weather, impact of external force and from
falling objects.
WARNING
Warning of suspended loads!
To relocate the machine, it must be lifted and transported.
The machine can topple over and fall as a result of
improper lifting and transportation.
Never stand under suspended loads!
WARNING
Warning of suspended loads!
While transporting the machine, no persons must be
present on the machine or hang from it.
10. Internal handling:
To move the machine internally, only use trolleys of sufficient
stability and load bearing capacity. When handling, always be
sure to avoid knocks and vibration. Provide protruding objects
(motors, drag chains, wiring harnesses, hoses, cylinders) with
effective protection from damage.
11. Checking delivery for missing items
Refer to the order confirmation or the list in this operating
manual as well as the delivery note to ascertain what should
be included. On receipt, immediately check to make sure a
delivery is complete. Notify the shipping company making
the delivery of any missing parts (notice of loss) and also
immediately inform Hettich FurnTech GmbH & Co. KG.
12. Dealing with shipping damage
Immediately after arrival and unloading, thoroughly check the
machine for any shipping damage, i.e for externally visible
damage (fractures, dents, kinks, cracks etc.).
Any suspected shipping damage must immediately be:
• reported in writing to the shipping company making the
delivery (forwarder) and/or
• reported in writing to your own insurance company as well
if the transportation risk was insured by the owner
13. Measures for temporary storage
The machine is designed for immediate installation and start
up. The following measures must be taken if this does not
take place within a reasonable period of about 3 months
after receiving the machine:
•
Coat bare metal parts with corrosion inhibiting oil.
• Cover the control system, electrical devices / operating
equipment, drive motors to protect them from moisture and
dust.
• Taking particular care, cover / use adhesive tape to seal off
cable inlets into terminal boxes and plugs.
• Protect wiring harnesses from vermin. Mice and rats are
particularly partial to highly flexible cables.
• Store the machine in a dry, frost free room.
• Also observe the storage instructions.
Apply appropriate measures to protect the stored machine
from tipping over, falling objects, impact from external
force (e.g. industrial vehicles bumping into it), knocks and
vibrations.
14. Site of installation
An even standing surface with a sufficient load bearing
capacity is essential for setting up the machine in a proper
and safe manner. Any unevenness in the standing surface
must be evened out by metal shims to ensure that the
machine is not standing in a distorted manner.
The BlueMax Mini Modular Plus comes in secure shipment
packaging for safe transportation. A number of components
must be installed to make the machine ready for operation.
After installing the machine, it must be cleaned.
Using the 4 black brackets
1
supplied with the machine (in
conjunction with sliding block on the foot profile), secure the
machine on a bench / base frame to be provided at the site of
installation so as to prevent the machine from falling.
CAUTION
Risk of crushing!
Allow a space of at least 500 mm between moving
machine parts and pillars, parts of the building, cabinets
etc.!
Do not stand any laden pallets in this safety zone!
1