Hettich BlueMax Mini Modular Plus, Руководство по эксплуатации, Страница: 41 / 88

41 41
Drilling hole line, interchangeable drilling unit, 9 spindles
On the control unit, set selector switch to the "Drill" position.
• Move panel
1
up against upright centre stop
2
• Hold down foot switch (pushbutton) until drilling process
has been completed. You can now see the first hole line
3
• Fold down centre stop
2
and move panel to the right until
it meets marking pin
6
• Push marking pin into second hole
7
in panel and press
foot switch (pushbutton)
NOTE
Keep moving the panel towards the middle of machine
when the continuation stop dips into drill hole.
• Perform the second work step. Depending on panel length,
this work step may have to be repeated.
• Hold-down clamp
8
only holds panel in place while holes
are being drilled.
• Afterwards, clean the bench to provide an even and clean
support surface for the next panel.
Fig. 6: Foot switch (optional)
2
3
1
Fig. 28: Hole line Fig. 29: Continuation stop
Fig. 30: Centre stop Fig. 31: Hold-down clamp
8
8
8
7
6
6
Fig. 27: Drilling hole line with interchangeable
drilling unit, 9 spindles