Herz pelletfire, Руководство по эксплуатации

Страница: 50 / 96

11 Description of the menu navigation and adjustment values
50 Betriebsanleitung_pelletfire_Touch_Englisch_V1.2
Term Description Unit
Status I
     
Collector flow
temperature
Displays the collector flow temperature °C
Collector backflow
temperature
Displays the collector backflow temperature °C
Tank 1 temperature Displays the temperature of tank 1 (e.g.: hot water tank, buffer) °C
Tank 2 temperature
Displays the temperature of tank 2 (e.g.: hot water tank, buffer)
(only visible, if program 3, 4, 5 or 6 is chosen)
°C
Status II
     
Actual yield Indication of the current energy yield W
Daily yield Indication of the energy yield on one day (from 0
– 24h)
Wh
Total yield
Indication of the total energy yield measured
kWh
Collector pump Indication of the state of the collector pump -
Loading pump
Indication of the state of the loading pump

only visible, if program number 2 or 6 is chosen
-
Switching valve
Indication of the state of the switching valve

only visible, if program number 3,4,5 or 6 is chosen
-
Settings I
     
Program number Indicates the program number (1 to 6) -
Antifreeze
Outside temperature setting (-45 to 5) which conducts a permanent
running of the solar pump to avoid freezing.
°C
Flow rate
Flow rate setting (0-99,9) for calculating solar output resp. for
calculating the yield
l/min
Rotation speed control Activation of speed regulation (ON/OFF) -
Min. rotation speed Setting up minimum rotation speed (20-100) of the solar pump %
Must value Setting up rotation speed set point of solar pump °C
Control difference Setting up the control difference of the rotation speed control (if active) °C
Settings II
     
Pump trigger
Setting up minimum collector temperature (15-70) to start up the solar
pump
°C
Tank 1 must
temperature
Setting up must temperature (25-90) of tank 1 °C
Difference 1 Difference between collector and tank 1 °C
Tank 1 max.
temperature
Setting up maximum temperature (25-95) of tank 1 °C
Tank 2 must
temperature Setting up must temperature (25-90) of tank 1
(

only visible, if program number 3, 4, 5 or 6 is chosen)
°C
Difference 2
Setting up the difference (5-30) between collector and tank 1
(

only visible, if program number 3, 4, 5 or 6 is chosen)
°C
MODUL
Boiler Buffer Hot water tank Heating circuit Time mode
Solar
Hydr.compensat
Net pump Zone valve
Ext. requirement
addit. boiler