Herz pelletfire, Руководство по эксплуатации

Страница: 55 / 96

Description of the menu navigation and adjustment values 11
Betriebsanleitung_pelletfire_Touch_Englisch_V1.2 55
11.14.7 Zone valve
Menu structure
       
Overview Settings
Switch on barrier
Temp.increase
       
Status
Existing temperature
Required temperature
Zone valve
Agg-Test
Zone valve open
Term Description Unit
Status
   
Existing temperature
Display of the temperature of the preceding module (e.g. buffer top
temperature by the buffer)
°C
Required temperature
Display of the required temperature of the downstream module (e.g.
buffer)

The required temperature is those temperature which the preceding
module must make the downstream module available
°C
Zone valve Indication of the state of the zone valve -
Settings
   
Switch on barrier
Setting the switch on barrier for the zone valve:

Is the temperature of the preceding module (e.g. buffer top
temperature by the buffer) higher than the adjusted switch on barrier,
the zone valve is open. Is this not the case, the zone valve stays
closed.
°C
Temp.increase
Adjusting the temperature increase for the required temperature

Due to heat losses you can adjust an addition to the required
temperature of the downstream module
°C
Agg-Test
   
Zone valve open*
Indication of the state of the zone valve:

When the indicator lamp lights up the zone valve is open
-
MODUL
Boiler Buffer Hot water tank Heating circuit Time mode
Solar Hydr.compensat Net pump Zone valve
Ext. requirement
addit. boiler