5
Schematic
Schematic
Schematic
Schematic Diagram
Diagram
Diagram
Diagram of
of
of
of Front
Front
Front
Front Panel
Panel
Panel
Panel
①
“< ” key: It is used to complete setup function together with
“Function” key.
②
“Function” key: Press “Function” key to switch between
setup functions. Please refer to “Operating Instructions” Section for
specific operations.
③
“
>
>
>
>
” key: It is used to complete setup function together with
“Function” key.
④
“Reset” key: When alarm occurs, press this key to stop
alarming, and alarm message will be automatically kept in record. For
HB-2020-C wireless receiving host, when alarm occurs, press this key
to stop alarming, and at the same time to stop dialing pre-set
telephone numbers. When entering into setup mode, press this key to
exit. When telephone line short circuit or cut-off alarm function
occurs, press this key to stop this function, or press this key again or
reset/power off the host to reactivate this function.
⑤
Time Display: It is usually used to show time through a
flashing second lamp. When alarm occurs, it is used to display alarm
reception time through a completely lit second lamp. When entering
setup mode, it is used to display setup contents through a completely
lit second lamp.
⑥
Orientation Display: It is usually used to display clock
seconds. When an alarm occurs, it is used to indicate alarm location in
defense area.
“
E1
”
means the host enclosure has been dismantled.
When entering into setup mode, it is used to display function setup
