HENGBO HB-2020 Series страница 15 Скачать руководство пользователя

Страница: 15 / 30

Alarm Record No. Alarm Location

Function 7

Alarm Record Inquiry

In “alarm record inquiry” mode, press “<” key to display alarm

record number and alarm location. Press “>” key to display alarm time

(see the Figure below)

Alarm Record Time Alarm Record Time Function 7

Hour

Minute

Alarm Record Inquiry

Press “>” key again to display the record number and alarm

location of the previous alarm record, and then press “>” to display

the alarm time of the previous alarm record.

(8)

(8) How

How

How to

to Set

Set

Set Alarm

Alarm

Alarm Sound

Sound

Sound and

and

and Alarm

Alarm

Alarm Sound

Sound

Sound Volume

Volume

Press the “Function” key to enter into “Alarm Sound and Alarm

Sound Volume” setup mode and display the following information:

Press

< to set

Press > to set

Function 8

Alarm Sound

Alarm Sound Volume

Set Alarm Sound

Function 8 serves to set alarm sound and alarm sound volume. Press

“<” to set alarm sound and press “>” to set alarm sound volume.

This host provides three types of alarm sounds. “01” is 120 ambulance

warning sound, “02” is 110 police car warning sound and “03” is 119

fire warning sound. And there are four levels of alarm sound volume,

which gradually increases from “00” to “03”. During setup, the

wireless receiving host can provide pre-set alarm sound and alarm

sound volume for reference.

(9)

(9) How

How

How to

to Set

Set

Set Power

Power

Power On/Power

On/Power

On/Power Off

Off

Off Function

Function

Function by

by Hand

Hand

Содержание HB-2020 Series































Результаты поиска

Содержание HB-2020 Series

Отзывы:

Похожие инструкции для HB-2020 Series

Бренды по названию

Популярные бренды

HENGBO HB-2020 Series, Руководство пользователя

Результаты поиска

Содержание HB-2020 Series

Отзывы:

Похожие инструкции для HB-2020 Series

Бренды по названию

Популярные бренды