15
Manual Power Off: In power-on mode, if it is required to turn
off the host at the moment, but users don’t want to turn power off to
avoid resetting time after reset, the host shall be operated as follows:
In standby mode (as shown in Figure A), hold down “>” key (used to
set second) for 5 seconds, and the host will give out two short “beep”
sounds, and at the same time, second display zone becomes empty (as
shown in Figure B), then the receiving host enters into power-off
mode, but at this time, if the host clock works normally, the host don’t
receive any alarm information (except for emergency zone) until the
host is normally powered on by hand.
Manual Power On: Hold down “<” key for 5 seconds to display
the following information:
Figure A
Manual Power Off:
Hold down “>” key for 5 seconds to
display the following information:
Figure B
Manual Power On: In manual power off mode (as shown in Figure B),
hold down “>” key (used to set hour) for 5 seconds, and the host gives
out a short “Beep” sound, and at the same time, second display zone
of the host displays second or“
－ －
”, which means the host has
returned to normal power-on mode (as shown in Figure A).
Note: Users and distributors shall make clear the difference shown as
follows. In automatic power-off mode, the second display zone of the
receiving host displays “
－－
”, while in manual power-off mode, the
second display zone becomes empty. The host will display second or
“
－－
” until normally powered on by hand.
3.
3.
3.
3. Programming
Programming
Programming
Programming Set-up
Set-up
Set-up
Set-up for
for
for
for HB-2020C
HB-2020C
HB-2020C
HB-2020C Wireless
Wireless
Wireless
Wireless Receiving
Receiving
Receiving
Receiving Host
Host
Host
Host
