24
Press “<” key to select zone number. Press “>” key to change type of
zone. After determining the zone, press the “Function” key, and the
host will give out a “beep” sound prompt, and at the same time, the
screen displays “01:0-10” and “10” stops flashing, which means the
code for this zone has been emptied, and the host enters into code
matching mode and waits for receiving signals emitted by detectors
(transmitter). At this time, detectors (transmitter) will be triggered to
emit signals once. If the host has received correct code emitted by
detectors (transmitter), it will give out two “beep” sounds, and “
-
”
will automatically turn into “
_
”, which means code learning is
successful. And then press“<” key to set for other zones, or press
“Reset” key to exit code matching mode.
For example: Set one of wireless detectors in zone 02, which is
an emergency zone. Firstly, set this wireless detector in alert mode,
power the host off, press the “Function” key and at the same time,
power the host on, and then release the “Function” key. At this time,
the screen will display “01:0- 10”. Press “<” key to set zone number
to 02, and at the same time, the screen will display “02:0- 10”. Press
“>” key, and the screen will display“02:1- 10”. And then press the
“Function” key, and detectors (transmitter) will be triggered to emit
signals. If the host has received correct code emitted by detectors, it
will give out two “beep” sounds, and “
-
” will automatically turn into
“
_
”, which means code learning is successful.
IX.
IX.
IX.
IX. Main
Main
Main
Main Technical
Technical
Technical
Technical Specifications
Specifications
Specifications
Specifications
Receiving Frequency: HB-2020A
433 MHz
HB-2020C
433 MHz
Wireless Receiving Sensitivity: ≤0.2μV (12db SINAD)
signal receiving :Fsk
multifrequency receiver.
Operating Voltage: AC220V±15% 50Hz
，
DC 12V~13.8V
