23
“Reset” key to exit code matching mode. If the host is required to
learn the code with another remote controller, please select a new zone
in accordance with above mentioned procedure, and let the host learn
the code with the remote controller. To exit, please press “Reset”.
<
二
>. HB-2020 Series host can automatically learn code with wireless
detectors. The host can receive alarm signals only when wireless
detectors complete learning code with the host. The host can learn the
code with a wireless detector in every defense zone. There are 100
defense zones in total (defense zone 00-99), and each zone can be set
to common zone or emergency zone.
Common Zone: The wireless receiving host can’t respond to
wireless signals emitted by wireless detectors in power-off mode, but
it still responds to operations of emergency button on remote control.
Emergency Zone: It is also called 24-hour defense zone. As long as
the host is under working mode, it can respond to signals emitted by
wireless detectors in this zone, and is not subject to pre-set
power-on/power-off time. It can respond to operations of emergency
button and can be applied in places requiring emergency help.
How to Learn Code with Detectors
In power-off mode, press the “Function” key of the host, and at the
same time turn on the power switch, and then release the “Function”
key. At this time, the screen will display the following information:
Function Menu 10, code learning, flickering display.
Display code learning status, “¯”(overline) means code learning has
has
has
been completed
,
“
－
” (middle line) means no code or
coding is completed.
Indicate type of zone, “0” means common zone, “1”: emergency zone.
Display zone number.
