Hemisphere GPS LiteStar II Air, Руководство пользователя

Страница: 53 / 135

44
4: Logging Job Data
C
HANGING
L
OG
S
ETTINGS
Logging is automatically enabled in LiteStar II Air (if you have
purchased the logging version).
However, there are three log settings that can affect the log data
logged:
• Log speed - the speed at or above which logging is ON.
By default, the log speed is 20 m.p.h. The log speed can
be toggled between the default of 20 and 0.
• Log interval - the frequency that spray activity data is
logged. By default, the log interval is set to 2 (means that
position and spray information is logged every 2 seconds).
Log interval options are: 0.2, 1, 2, 5, and 60 seconds.
• Log per job - this allows you to either begin a new log
with each new job, or to log continuously. By default, this
is set to log continuously.
To change log settings:
1. Select to access the Main menu.
2. Select Setup > from the Main menu.
SYSTEM
Start-up Help Y
Delete
Logging
>
Utilities >
LiteStar II Air.book Page 44 Thursday, June 7, 2007 4:02 PM