Hemisphere GPS LiteStar II Air, Руководство пользователя

Страница: 122 / 135

LiteStar II Air User Guide
113
Q: How do I store my last sprayed point?
A: LiteStar II Air automatically stores your last sprayed point of a
job. To navigate back to that stored point, press and
select Return >. On the Return to Mark screen, select Last
Swath. LiteStar II Air automatically switches to guidance from the
last swath.
Q: Can LiteStar II Air store a waypoint?
A: Yes. While you can’t program in a specific waypoint, LiteStar II
Air will remember a waypoint that you mark while driving a field.
This is called a mark in LiteStar II Air. During an active job, press
. Save the mark as a Waypoint. LiteStar II Air stores the
GPS coordinates of the location where you pressed the mark!
Q: What is cross-track distance?
A: Cross-track distance is the distance to your swath. The left
Lightbar display shows your cross-track distance and direction (left
or right) by default.
Q: How does the weather affect the GPS signal?
A: Weather normally does not affect the GPS signal. This includes
rain, sleet, snow, thunderstorms, and wind.
Q: How do I change my swath width?
A: You can only set your swath width when you start a new job.
Upon selecting a new job, LiteStar II Air will prompt you to verify
your swath width. If it is incorrect, you can change it at this time.
Q: I’ve just finished spraying my field. How do I save my
work? How do I start a new job?
A: You don’t need to save your work - LiteStar II Air automatically
saves data associated with each job, including your last sprayed
point (unless starting a new job - the last sprayed point will be
overwritten each time you turn off power), the total sprayed
acreage, and any marks you entered during the job.
LiteStar II Air.book Page 113 Thursday, June 7, 2007 4:02 PM