Hemisphere GPS LiteStar II Air, Руководство пользователя

Страница: 38 / 135

LiteStar II Air User Guide
29
2. Press the ON/OFF button located on the top of the controller
(shown in Step 1).
3. LiteStar II Air will start up as follows:
• the controller will display the Satloc logo
• the Lightbar will flash and begin a boot-up sequence,
which includes:
• Lightbar tests
• software and GPS source tests
• controller connection tests (checks the controller for
connections)
Controller Boot Up
The controller’s buttons and display screen are the brains of
LiteStar II Air; everything you see and do is entered in the
controller.
You cannot enter field details or spray patterns until the controller’s
boot up is complete. The controller goes through the following
boot-up sequence:
1. The display screen flashes the Satloc logo.
Note: If you have purchased the non-logging version, skip
Step 1. The memory card slot shown will be covered because
the non-logging version uses internal memory rather than a
memory card.
LiteStar II Air.book Page 29 Thursday, June 7, 2007 4:02 PM