Helm HELMPAK, Руководство пользователя

Страница: 32 / 43

HelmPak Press Control
32
Users Guide
Change Active PLS Settings
Press PLS button at the bottom of the Active Overview screen to jump to Active PLS screen
Touch the fields indicated by CH1, CH2, etc. to select each PLS channel, the current status of the output
is displayed below in the ON/OFF box.
Touch the Mode window to select the desired mode, these are explained on page 7.
Touch Angle On/Off to enter values.
Touch Timer window to enter value if Timer Mode is selected.
Touch Intermittent Interval window to set the interval count if Intermittent Mode is selected.
Press Save Changes to save these settings to the current job.
Return to the Active Overview and Press “Save to Recipe” to save the changes permanently in the Job
Recipe.