Helm HELMPAK, Руководство пользователя

Страница: 13 / 43

HelmPak Press Control
13
Users Guide
SECTION 3:
BASIC OPERATING INSTRUCTIONS
•
Turn power on
•
Set CONTROL POWER to ON
•
Press CONTROL POWER RESET, to reset the safety relay
•
Start the Oil/Coolant pumps, button will turn green when all pumps running
•
Set the press MODE selector switch to INCH mode
•
Set the Main Motor selector switch to FORWARD
•
Press Main Motor Start
•
Verify that the current job/recipe matches the part being produced
•
Set the press MODE selector switch: Inch, single, or Continuous
The Main Menu screen is the initial startup screen.
Fault conditions are indicated on the top of the screen in the alarm banner. Clear any
faults by pressing the FAULT RESET button on the operator station.
Press is ready to start – Refer to Mode of Operation
♦
To EMERGENCY STOP the press push
E-STOP
♦
To stop the press in a non-emergency press
TOP STOP