Helm HELMPAK, Руководство пользователя

Страница: 28 / 43

HelmPak Press Control
28
Users Guide
Enter or Change Robot Recipe Settings
Press Blue Robot button at the bottom of the overview screen to jump to Robot Recipe screen
Robot Setup:
Robot Cycle – The on and off angles represent the OK to enter press window
Robot in press E-stop – If the robot is in the press within this window, the press well immediately
stop
Robot Program:
Program # - is used by the robot control to compare the current job running in the press with the
current job in the robot control.
Robot Wait Time – Is the amount of time the press will wait, at top, for the initiation signal from the robot
control. Once timed out the press will need to be armed and started by the operator.
Press Save Changes to save settings permanently in the Recipe.