Helm HELMPAK, Руководство пользователя

Страница: 14 / 43

HelmPak Press Control
14
Users Guide
MODE OF OPERATION
Off Disable operation of clutch/brake control.
Inch Press and release both RUN buttons on side of
Operator Interface enclosure to inch slide. Hold
RUN buttons in and press will make one
complete cycle, stopping at the top of the cycle,
if inch stop on top is enabled
Single Stroke Press and hold RUN buttons for entire down
stroke of press, past 180. Press will stop at the
top of the cycle.
Continuous Run In this application Continuous is being used to
operate the press in a Single-On-Demand mode.
Press CONTINUOUS SETUP button. Press
both RUN buttons within 5 seconds of pressing
the CONTINUOUS SETUP button. Hold the
RUN buttons for the entire down stoke of the
first cycle. Release the RUN buttons on the
upstroke of the first cycle. The press should
now be operating in Single-On-Demand mode.
The press will stop at the top of the press stoke,
waiting for the robot to leave and initiate another
stroke. The press will wait at top for an amount
of time determined in the Job Recipe.
SHUT DOWN SYSTEM
To shut down the Helm-Pak:
•
Stop the press
•
Shut off Main Motor
•
Shut Control Power off.
•
Turn panel power off.