HEIDENHAIN GAGE-CHEK 2000, Руководство по эксплуатации

Страница: 231 / 250

Information for the Operator user | Management of parts
11.1.1 Configuring selected functions
Saving functions
Drag the
Part
function element to the left and into the
workspace
The
Part
dialog box appears
Enter a name in the
Name
input field
Enter more information in the
Comment
input field if required
Select the functions that you want to add
Use the
+ or – buttons to enter how many times you want to
add a specific function to the Part function
Tap
Close
When the
Part
function is activated, you can still add new functions to
the function bar using the described procedure.
Further information: "Adding a function element to the function bar",
Page 38
Activating the Part function
Tap
Part
The green lettering of the function element indicates that the
function is active
All other functions of the function bar are hidden. Only the
functions that you have previously selected are displayed
Configuring saved functions
You can configure the functions that you have saved. The configuration procedure is
the same as the one you are familiar with from outside of a part.
In addition, you can import or export the saved configuration data using a file in XMG
format.
Further information: "Configure the Dial gage function", Page 223
Further information: "Configuring the Mastering function", Page 220
Further information: "Configuring the MinMax function", Page 212
Further information: "Configuring the measured value output", Page 234
III
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 06/2022
231