HEIDENHAIN GAGE-CHEK 2000, Руководство по эксплуатации

Страница: 220 / 250

Information for the Operator user | Mastering
III
9 Mastering
9.1 Configuring the
Mastering
function
The
Mastering
function allows you to set the position values in the position display.
Measure, for example, a part on the measuring machine and save the values from
the measuring log as a reference part. In addition, you can directly adopt the values
of a part that you are using as a reference part from the position display. When
configuring the function element, you specify the axes to be affected by
Mastering
.
The following steps are necessary in order to configure the
Mastering
function:
Add the
Mastering
function element to the function bar
Select the axes
Enter or load the values that will be set
Adding a function element
Tap
Measure
in the main menu
Drag an empty function bar field to the left into the workspace
The dialog for selecting the function element appears
Tap the
Mastering
function element
Tap
Close
The
Mastering
function element is now available
Configuring the values
Drag the
Mastering
function element to the left into the
workspace
The
Configuration Mastering
dialog box appears
Enter a name in the
Name
input field
Enter more information in the
Comment
input field as needed
Select the check box of the desired axes
Tap
Apply in order to load the current values of the position
display
or
Enter values for the desired axes
Tap
Close
220
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 06/2022