HEIDENHAIN GAGE-CHEK 2000, Руководство по эксплуатации

Страница: 225 / 250

Information for the Operator user | Dial gage
10.1.4 Entering values
After you activated the dial gage for your axis, you can enter values.
The device offers two possibilities to enter values:
Enter values individually
Enter values symmetrically
Figure 45: Example of a value input for an axis
Entering values individually
Tap the input field
Enter the desired value
Confirm the entry with
RET
The entered value is applied
Entering values symmetrically
If you want your desired entry to exhibit identical positive and negative limit values,
then you can change the magnitude of these limit values at the same time by using
the
Warning limits
,
Tolerance limits
and
Minimum/ Maximum
input fields.
If you have selected
absolute
value input, then the respective values will be
calculated based on the nominal value.
If you have selected
relative
value input, the entered value (positive and negative)
will be transferred directly.
Tap inside the desired input field
Enter the desired value
Confirm the entry with
RET
The entered value is applied
III
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 06/2022
225