HEIDENHAIN GAGE-CHEK 2000, Руководство по эксплуатации

Страница: 101 / 250

Information for OEM and Setup users | Commissioning
Parameter Explanation
Compensation
Mechanical influences on the axes of the machine are compensat-
ed
Settings:
ON
: Compensation is active
OFF
: Compensation is not active
Default value:
OFF
Number of supporting points
Number of measuring points for error compensation on both axes
(
X
and
Y
) of the encoder
Setting range:
1 ... 99
(
X
and
Y
)
Default value:
2
(
X
and
Y
)
Spacing of the supporting points
Spacing of the compensation points on the axes (
X
and
Y
)
Setting range:
0.00001 mm ... 100.00000 mm
(
X
and
Y
)
Default value:
1.00000 mm
(
X
and
Y
)
Read deviations of calibration
standard
A file containing the deviations of the calibration standard is read
Import table of supporting points
Uploading a file
in .txt-format with position information regarding the
supporting points
in .xml format with position information regarding the
supporting points and the deviations of the calibration
standard
Export table of supporting points
A file containing the position indications of the supporting points
and the deviations of the calibration standard is saved
Table of supporting points
Opens the table of supporting points for manual editing
Deactivating the nonlinear axis error compensation
Before you can configure the
Nonlinear error compensation (NLEC)
, you first need
to deactivate it.
Settings
►
Axes
►
General settings
►
Error compensation
►
Nonlinear error compensation (NLEC)
Use the
ON/OFF
slider to deactivate the
Compensation
function
The table of supporting points is now released for editing
II
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 06/2022
101