HEIDENHAIN GAGE-CHEK 2000, Руководство по эксплуатации

Страница: 88 / 250

Information for OEM and Setup users | Commissioning
II
Parameter Explanation
Teach sequence
Starts the teach sequence for determining the
Line count
for an
angle encoder based on a specified angle of rotation.
Display mode
For angle encoders and for the display of a rotary axis as a linear
axis.
Settings:
–∞ ... ∞
0° ... 360°
-180° ... 180°
Default value:
–∞ ... ∞
Mechanical ratio
For display of a rotary axis as a linear axis:
traverse path in mm per revolution
Setting range:
0.1 mm ... 1000 mm
Default value:
1.0
Reference marks
Configuration of the
Reference marks
Further information: "Reference marks (Encoder)", Page 90
Analog filter frequency
Frequency value of the analog low-pass filter
Settings:
33 kHz
: Suppression of interference frequencies above 33 kHz
400 kHz
: Suppression of interference frequencies above
400 kHz
Default value:
400 kHz
Terminating resistor
Dummy load to avoid reflections
Settings:
ON
or
OFF
Default value:
ON
The terminating resistor is automatically deactivated
for incremental signals of the current signal type
(11 μ A
PP
)
88
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 06/2022