HEIDENHAIN GAGE-CHEK 2000, Руководство по эксплуатации

Страница: 177 / 250

Information for OEM and Setup users | Servicing and maintenance
Settings
►
Axes
►
<Axis name>
►
Encoder
►
Diagnosis
Parameter Explanation
Amplitude A
Display of amplitude A in volts (V)
Amplitude B
Display of amplitude B in volts (V)
Asymmetry
Asymmetry value
Rapid traverse speed
for radial movements
Phase deviation from 90°
Freeze graph
Freezing of Lissajous figure
Settings:
ON : The graph is frozen and is not updated when
the encoder is moved
OFF : The graph is not frozen and is updated when
the encoder is moved
Default value:
OFF
Show tolerance range
Display of tolerance circles in a range from 0.6 V to
1.2 V
Settings:
ON : Two red circles are shown
OFF : Tolerance circles are hidden
Default value: OFF
Encoder input for
comparative measure-
ment
Display of another encoder at another encoder input
for comparative measurement; the Freeze graph
parameter allows you to superimpose the circles
Settings:
Selection of desired encoder input
Default value: Not connected
The parameter is available only if another
encoder with 1 V
PP
or 11 µA
PP
interface is
connected.
Freeze comparative
graph
The Lissajous figure of the encoder at the encoder
input is frozen for comparative measurement
Settings:
ON : The graph is frozen and is not updated when
the encoder is moved
OFF : The graph is not frozen and is updated when
the encoder is moved
Default value:
OFF
The parameter is available only if another
encoder with 1 V
PP
or 11 µA
PP
interface is
connected.
II
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 06/2022
177