HEIDENHAIN GAGE-CHEK 2000, Руководство по эксплуатации

Страница: 139 / 250

Information for OEM and Setup users | Setup
Element and parameter Default value Explanation
element id "X" Measured value to which the subsequent parameters
apply; each measured value is defined in its own line
Possible values:
"X": Current position of X axis
"X MIN": Minimum of X axis
"X MAX": Maximum of X axis
"X RANGE": Range of X axis
"Y": Current position of Y axis
"Y MIN": Minimum of Y axis
"Y MAX": Maximum of Y axis
"Y RANGE": Range of Y axis
"Z": Current position of Z axis
"Z MIN": Minimum of Z axis
"Z MAX": Maximum of Z axis
"Z RANGE": Range of Z axis
"Q": Current position of Q axis
"Q MIN": Minimum of Q axis
"Q MAX": Maximum of Q axis
"Q RANGE": Range of Q axis
element unit "mm" The measured value is output in the unit millimeters.
Possible values: "mm", "inch", "deg", "dms", "rad"
If no value is defined, the units are not adapted
element base "10" "10": Measured value is output as a decimal value
"16": Measured value is output as a hexadecimal
value
element factor "1" Factor by which the measured value is multiplied
Example:
Measured value: 43.67
factor="100"
Measured value output: 4367.00
element
newline
"false" "true": There is a line break after the measured value
"false": There is no line break after the measured
value
element
decimalPlaces
"3" Number of decimal places to which the measured value
is rounded
element digits "0" Number of digits before the decimal separator to which
the measured value is rounded according to commer-
cial practice
Example:
Measured value: 43.67
digits="4"
Measured value output: 0043.67
element
positiveSign
"false" "true": Output a plus sign before the measured value
"false": Do not output a plus sign before the
measured value
II
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 06/2022
139