HEIDENHAIN GAGE-CHEK 2000, Руководство по эксплуатации

Страница: 212 / 250

Information for the Operator user | Minimum, maximum, and range
III
6 Minimum, maximum, and range
6.1 Configuring the
MinMax
function
The
MinMax
function helps you to acquire the following measured values:
Minimum Maximum Range
You can activate and deactivate this function by tapping the
MinMax
function
element on the function bar. When the function is active, the measured values will
be captured and shown in the position display. You can then transfer the measured
values to a computer via the measured value output. If you activate the
MinMax
function again, then the existing measured values will be overwritten.
The following steps are necessary in order to configure the
MinMax
function:
Add the
MinMax
function element to the function bar
Select measured values that are to be captured and displayed when the
MinMax
function is active
Adding a function element
Tap
Measure
in the main menu
Drag an empty function bar field to the left and into the
workspace
A dialog box for selecting the function element appears
Tap the
MinMax
function element
Tap
Close
The
MinMax
function element is now available
Selecting measured values
Drag the
MinMax
function element to the left and into the
workspace
A dialog box for selecting the measured values appears
Enter a name in the
Name
input field
Enter more information in the
Comment
input field if required
Tap the desired measured values to select them
Tap
Close
The selection is saved
If you activate the
MinMax
function, the selected measured
values will be captured and shown in the position display
Ensure that the
MinMax
function covers all measured values that you
want to send to a computer as part of the measured value output. If
measured values are missing then the value 0 is sent.
The measured value output always transmits the last position values
acquired. If you do not move an axis, the previously acquired values will
be transferred.
212
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 06/2022