GR SG9015841000000000
GR SG9015840000000000
Preset Plus Feeder
confidential
C.1.58
17
Front lays
17.1 Function
1
Fig. 72
Front lays
The Speedmaster SM / CD 102 has fifteen tilting front
lays (Fig. 72/1) underneath the feed table. These
front lays can individually and gradually be thrown on
and thrown off. The front lays align the front edge of
the print sheets true to register. The following set-
tings are possible:
D
Throwing on and throwing off: A front lay that
has been thrown on is in contact with the front
edge of the print sheet during the alignment
procedure.
D
Setting forward and backward: This function is
used for adjusting the gripper bite.
17.2 Throwing on/off the front lays
2
1
Fig. 73
Throwing on/off the front lays requires a 3-mm Allen
key.
1.
Open the glass guard on the printing unit.
The separator rolls swing back.
2.
Insert the Allen wrench (Fig. 73/1) through the
borehole in the sheet guide plate (Fig. 73/2) into
the adjusting screw of the required front lay.
3.
Turn the screw through 90
°
D
clockwise, if you wish to throw on the front
lay.
D
anti-clockwise, if you wish to throw off the
front lay.
Note
When you turn the screw, you can feel a
notched division. The rotary distance be-
tween ”front lays thrown on” and ”front
lays thrown off” is subdivided into 15
notches. Setting intermediate values
should be the exception.
4.
Close the glass guard on the printing unit.
UTKSG9015120000000000
Содержание Speedmaster CD 102
