HEIDELBERG Speedmaster CD 102, Руководство пользователя

Страница: 48 / 170

Preset Plus Feeder
confidential
C.1.10
1. Press the Main pile down button.
The pile support plate moves down. For safety
reasons, the pile support plate stops the down
motion 12 cm above ground.
Warning – the pile support plate can
crush members!
When lowering the pile support plate,
do not stand in the zone of danger of
the pile support plate.
Before lowering the pile to the ground,
ensure
- that there are no persons in the zone
of danger.
- that nothing can be pinched under-
neath the pile support plate.
2. Press again the Main pile down button.
The pile support plate
D
stops briefly above the ground,
D
aligns itself automatically in center posi-
tion,
D
and continues its movement down to the
ground.
3. Move the empty pile carriage out of the feeder.
4. Move the prealigned pile carriage on the rails
up to the front pile stops. Carefully observe the
lateral stops during this process.
5. Close the brakes on the pile carriage.
6. Press the Main pile up button.
The pile support plate moves upwards and
stops at the alignment position underneath the
side stops for pile centering.
The pile aligns itself automatically when pile
centering is switched on. If pile centering is
switched off, you must use the
Align pile but-
tons to align the pile manually.