HEIDELBERG Speedmaster CD 102, Руководство пользователя, Страница: 106 / 170

GR SG9015867000000000
GR SG9015868000000000
GR SG9015870000000000
Preset Plus Feeder
confidential
C.1.68
1
Fig. 92
Removing the suction tape
8. Pull the suction tape (Fig. 92/1) off the suction
tape module.
19.4 Installing the suction tape
1
Fig. 93 Fitting the suction tape
Fitting the suction tape
1. Fit the suction tape on the suction tape module.
Note
The two bore markings in the suction
tape (Fig. 93/1) must be at O.S.
2. Place the suction tape on the center of the suc-
tion tape module.
Ensure that the suction tape is underneath the
guides of the suction tape module.
1
2
Fig. 94 Installing the idler pulley
Installing the suction tape guide
3. Place the tape guide rollers (Fig. 94/2) between
the roller bearings.
4. Insert the shafts (Fig. 94/1) into the roller bear-
ings.
Push the shaft through the first roller bearing
and the roller until it is in contact with the bore-
hole of the second roller bearing.
5. Using light blows with a hammer (Fig. 95/1),
drive the shafts into the bearing until they are
flush with the outside of the roller bearings.