HEIDELBERG Speedmaster CD 102, Руководство пользователя

Страница: 41 / 170

Preset Plus Feeder
confidential
C.1.3
2 Pile change
2.1 Normal pile change
Note
The maximum pile weight is:
- with pile carriage 1400 kg.
- without pile carriage 2000 kg.
1. Press the
Main pile down button.
The pile support plate moves down. For safety
reasons, the pile support plate stops the down
motion 12 cm above ground.
Warning – the pile support plate can
crush members!
When lowering the pile support plate,
do not stand in the zone of danger of
the pile support plate.
Before lowering the pile to the ground,
ensure
- that there are no persons in the zone
of danger.
- that nothing can be pinched under-
neath the pile support plate.
2. Press again the Main pile down button.
The pile support plate
D
stops briefly above the ground,
D
aligns itself automatically in center posi-
tion,
D
and continues its movement down to the
ground.
3. Move the empty pallet out of the feeder.
4. Move a full pallet onto the pile support plate.
Center the pallet when you insert it.
5. Press the Main pile up button.
The pile support plate moves upwards and
stops at the alignment position underneath the
side stops for the pile alignment.
The pile aligns itself automatically when pile
alignment is switched on. If pile alignment is
switched off, you must use the
Align pile but-
tons to align the pile manually.
UTKSG9015010000000000