HBM QuantumX MX1609, Руководство по эксплуатации, Страница: 167 / 181

166 Accessories
HBM QuantumX
Transducer side
General information
Article Description Order No.
D − Sub − HD 15-pin plug set with TEDS chip Plug kit D − Sub − HD 15-pin (male) with TEDS chip for storing a
sensor data sheet; housing Metallized plastic with knurled
screws.
Note: The TEDS chip is blank.
1-SUBHD15-MALE
Port Saver D − Sub − HD 15 pin Four fully-wired male to female port savers protecting the
wear and tear of D − Sub − HD 15 pin ports for frequent
plugging and unplugging of transducers. Extends contact
durability by min. 500.
This adaptor attaches securely with screws.
1 − SUBHD15 − SAVE
SCM − SG120/350 SCM − SG350 Strain Bridge Module (120 Ohm or 350 Ohm)
Signal conditioning module for QuantumX full bridge input
(D − Sub − HD15 pin).
Integrated 350 Ohm bridge completion resistor, shunt
calibration, TEDS, D − Sub − HD-device connection.
Soldering point for transducer cable.
1 − SCM − SG120
1 − SCM − SG350
Adapter D − Sub − HD 15-pin to D − Sub 15-pin. Adapter D − Sub HD 15-pin to D − Sub 15-pin for connecting
transducers with pre − assembled D − Sub plugs on MX840
(length approx. 0.3 m)
Note: Pre-assembled for full bridge (6-wire).
1-KAB416
Push-In connector (8 Pins) 10 Push-In-connectors, Phönix Contact, 8 Pins
(Module: MX879, MX1601, MX1615)
1 − CON − S1005