HBM QuantumX MX1609, Руководство по эксплуатации, Страница: 163 / 181

162 FAQ
HBM QuantumX
Question/Problem
How can I check whether the amplifier is physically connected correctly with the network
cable and can actually be reached via my PC?
Reply/Solution:
This can be easily checked with the help of a Windows® function. Please open the
Windows® entry prompt (Start
* >
Programs
* >
Accessories
* >
entry prompt) and enter
the following at Prompt C:>:
ping xxx.xxx.xxx.xxx
(ENTER)
The xxx.xxx.xxx.xxx represents the IP address of your QuantumX device. If correctly
connected, the device will reply positively. An example is shown in the following screenshot:
If you connect a QuantumX directly 1:1 to the PC, a "crossover patch cable" must be used as
the network cable.
If no module appears, there are several possible causes. Check the following points and
then repeat the search.
General reasons
S
Is the QuantumX module switched on and is the module LED lit up green?
S
Is the interface cable connected?
S
Have you activated the correct interface or correct interface adapter?
S
Check the scan options in the dialog Find modules ( Where do I find the scan options? ).