HB-TP180/200
Checking Facility for Temperature Control Units
Testing
O8354-EN 2018-11
31
7 Testing
7.1 Test principle
Fig. 7: Test principle
7.2 Automatic Thermo-5 test sequence
Requirement
For the automatic test sequence, at least software version >
SW51-2_1540 must be installed.
NOTICE!
Values entered in Ohm
(Ω) from Pt 100
temperature measurement are converted into
degrees Celsius (°C) using a formula. The basis for
this is the Pt 100 table according to the ITS-90
(International Temperature Scale).
12 Lmin @ 1 bar
HB-TP180/200
External
Reference
Pt 100
Fe-CuNi
Main line
Return line
Temperature Control Units
Ohms / °C
