HB-TP180/200
Checking Facility for Temperature Control Units
Safety
10
O8354-EN 2018-11
2 Safety
This paragraph provides an overview of all important safety
aspects for optimal protection of personnel as well as safe and
trouble-free operation.
Disregarding this Manual and safety regulations specified therein
may result in considerable danger.
2.1 Intended Use
The checking facility for temperature control units is designed and
constructed exclusively for the intended use described here.
The checking facility for temperature control units serves solely
for the quality testing (determining the measuring accuracy of the
temperature, pressure and flow measurement) of HB-Therm
temperature control units. The checking facility is not suitable for
continuous duty (only for the duration of the quality test).
The checking facility for temperature control units must be
operated solely in accordance with the values indicated in the
Technical Information.
Observance of all information in this manual also pertains to the-
intended use.
Any use of the checking facility for temperature control units other
than or going beyond the intended use is deemed as misuse and
can lead to dangerous situations.
WARNING!
Improper use poses danger!
A misuse of the checking facility for temperature
control units can lead to dangerous situations.
In particular the following must not be used:
– You must NOT use heat transfer mediums other
than heat transfer oil.
– You must NOT use pressures, temperatures
higher than those specified.
Any claims arising from damage as a result of improper use are
excluded.
