HB-TP180/200
Checking Facility for Temperature Control Units
Technical data
22
O8354-EN 2018-11
Heat transfer oil
(HB-TP200)
Suitable heat transfer oils must be used for operation with oil.
WARNING!
Danger may result if unsuitable heat transfer
oils are used
Using unsuitable oil poses the risks of cracking,
overheating and fire.
Therefore:
– The maximum permitted main line temperature
must exceed the maximum working temperature
of the unit.
– The permitted film temperature and the boiling
point must be at least 340 °C.
Do not use any aggressive medium that can destroy materials in
contact with the heat transfer medium.
NOTICE!
For further information, you can go to
www.hb-therm.ch
to download "Oil
recommendation for temperature control units
(DF8082-X,X=language).
3.6 Nameplate
The nameplate is located on the rear panel of the unit, on the
inside of the service flap and on page 2 o these operating
instructions.
The following information can be taken from the nameplate:
Manufacturer
Type designation
Unit number
Year of manufacture
Performance data
Connection data
Type of protection
Additional equipment
