HB-TP180/200
Checking Facility for Temperature Control Units
Maintenance
44
O8354-EN 2018-11
8 Maintenance
8.1 Safety
Personnel
Maintenance tasks described here can be performed by the
operator, unless otherwise indicated.
Some maintenance tasks must only be carried out by qualified
personnel or by the manufacturer exclusively. If this is required,
it is pointed out separately in the description of the respective
faults.
As a rule, work on the electrical system must only be carried out
by certified electricians.
Work on the hydraulic system must only be carried out by
qualified hydraulics technicians.
Personal protective equipment
Wear the following protective equipment for all maintenance/repair
work:
Safety goggles
Protective gloves
Safety shoes
Protective clothing
NOTE!
For specific work, the warning notices in this
chapter draw special attention to further protective
equipment.
Special dangers
The following dangers exist:
Risk of burns due to hot materials.
Risk of burns due to hot surfaces.
Danger of crushing due to rolling away or tipping.
Maintenance / repair work carried
out improperly
WARNING!
Danger of injury due to maintenance / repair
work carried out improperly!
Improper maintenance / repair work can lead to
severe personal injury or material damage.
Therefore:
– Before starting work, ensure that there is
sufficient space for assembly.
– When assemblies are removed, observe correct
assembly, re-assemble all fixing elements and
observe screw torque specifications.
