HARRISTON INDUSTRIES 4240 CLOD HOPPER Скачать руководство пользователя страница 70

Страница: 70 / 84

Belted Potato Chain:

The primary chains are a belted potato chain

which normally will need very little maintenance

and/or adjustment. If a chain runs to one side, it

normally has slipped one cog on the drive sprock-

et. The chain will have to be loosened and properly

aligned on the sprockets. Each chain is properly

tensioned when it sags slightly on the bottom side

but does not drag or catch on the frame.

To replace conveyor:

a. Move one or both of the shafts into their loos-

est position.

b. Open belt by removing pin at each belt.

c. Attach the replacement belt to the end of the

old belt.

d. Slowly pull the old belt out of the machine and

thread the new one into position.

e. Disconnect the old belt and connect the ends

of the new one together.

f. Move the shaft(s) into position to set the

tension of the belt and secure the bearing

assemblies.

g. Check the tension and alignment of the belt

frequently during the first 10 hours of opera-

tion and set as required. Then, go to the regu-

lar maintenance schedule. Normally a belt will

seat itself during the first 10 hours of operation

and then require less adjustment.

Connector

Conveyor

FIG. 48 BELTED POTATO CHAIN CONVEYOR (TYPICAL)

Содержание 4240 CLOD HOPPER





















































































Результаты поиска

Содержание 4240 CLOD HOPPER

Отзывы:

HARRISTON INDUSTRIES 4240 CLOD HOPPER, Руководство оператора, Страница: 70 / 84

Результаты поиска

Содержание 4240 CLOD HOPPER

Отзывы: