HARRISTON INDUSTRIES 4240 CLOD HOPPER Скачать руководство пользователя страница 18

Страница: 18 / 84

2.12 ELECTRICAL SAFETY

1. Have only a qualified electrician supply power. All

wiring should comply with ANSI/NFPA 70 electri-

cal requirements.

2. Make certain that the Clod Hopper is properly

grounded at the power source.

3. Make certain that all electrical switches are in the

OFF position before connecting power to the Clod

Hopper.

Turn machine OFF, shut down and lock out

power supply (safety lockout devices are avail-

able through your Harriston dealer parts de-

partment) and wait for all moving parts to stop

before servicing, adjusting, maintaining or re-

pairing any part of the electrical system.

5. Disconnect power before resetting any motor

6. Replace any damaged electrical plugs, cords,

switches and components immediately.

7. Do not work on Clod Hopper electrical system un-

less the power cord is unplugged or the power

supply is locked out.

Содержание 4240 CLOD HOPPER





















































































Результаты поиска

Содержание 4240 CLOD HOPPER

Отзывы:

HARRISTON INDUSTRIES 4240 CLOD HOPPER, Руководство оператора, Страница: 18 / 84

Результаты поиска

Содержание 4240 CLOD HOPPER

Отзывы: