HARRISTON INDUSTRIES 4240 CLOD HOPPER Скачать руководство пользователя страница 67

Страница: 67 / 84

FIG. 45 TENSION ADJUSTING (TYPICAL)

Elevating Conveyor

Flat Conveyor

Adjuster (Typical)

5.2.3 CONVEYOR BELT TENSION/ALIGNMENT OR REPLACEMENT

Conveyor belts are used to move potatoes with the

machine. The tension and alignment of the convey-

ors should be checked daily to insure proper function.

Replace the conveyor when damaged or badly worn.

To maintain conveyor belt(s), follow this procedure:

1. Place all controls in their OFF or neutral position.

2. Turn the power OFF at the master panel and lock-

out tag-out.

3. Clear the area of bystanders, especially small

children.

Tension:

The belts are tensioned correctly when there is a

1 to 2 inch (25 - 50 mm) sag on the bottom or

slack side of the conveyor during operation and

the belts should not slip during operation.

NOTE

If a belt slips during operation, locate

the "take-up" end of the belt; then on

both sides of the "take-up" end, loosen

the hardware securing the adjusters

and bearings. Tighten the belt equally

on each side; then tighten all hardware

to specified torque.

Содержание 4240 CLOD HOPPER





















































































Результаты поиска

Содержание 4240 CLOD HOPPER

Отзывы:

HARRISTON INDUSTRIES 4240 CLOD HOPPER, Руководство оператора, Страница: 67 / 84

Результаты поиска

Содержание 4240 CLOD HOPPER

Отзывы: