HARRISTON INDUSTRIES 4240 CLOD HOPPER Скачать руководство пользователя страница 16

Страница: 16 / 84

2.7 OPERATING SAFETY

Make sure that anyone who will be operating the

Clod Hopper or working on or around the units

reads and understands all the operating, main-

tenance and safety information in the operator's

manual. Also read and follow the instructions in

the manuals of other equipment in the system.

Turn machine OFF, shut down and lock out

power supply (safety lockout devices are

available through your Harriston dealer parts

department) and wait for all moving parts to

stop before servicing, adjusting, maintaining

or repairing.

3. Establish a lock-out tag-out policy for the work site.

Be sure all personnel are trained in and follow all

procedures. Lock-out tag-out all power sources

before servicing the unit or working around load-

ing/unloading equipment.

Make sure all control switches are in the OFF

position before connecting power supply.

Before supplying electrical power to the ma-

chine, be sure that you have adequate amper-

age at the proper phase and voltage to run it.

If you do not know or are unsure, consult a li-

censed electrician.

5. Keep working area clean and free of debris to pre-

vent slipping or tripping.

6. Keep hands, feet, hair and clothing away from

rotating and moving parts. Do not wear loose-fit-

ing clothing when working on or around the Clod

Hopper. Long hair must also be appropriately re-

strained close to the body. Keep others away.

7. Install and secure all guards before starting.

8. Keep all electrical components in good condition

before operating.

9. Review safety related items annually with all per-

sonnel who will be operating, using or maintaining

the Clod Hopper.

2.8 MAINTENANCE SAFETY

1. Good maintenance is your responsibility. Poor

maintenance is an invitation to trouble.

2. Follow good shop practices:

- Keep service area clean

and dry.

- Be sure electrical out-

lets and tools are properly

grounded.

- Use adequate light for the

job at hand.

Turn machine OFF, shut down and lock out

power supply (safety lockout devices are

available through your Harriston dealer parts

department) and wait for all moving parts to

stop before servicing, adjusting, maintaining

or repairing.

Do not work on Clod Hopper elec-

trical system unless the power

cord is unplugged or the power

supply is locked out. Lock-out

tag-out power source before per-

forming any maintenance work.

5. Always use personal protection devices such as

eye, hand and hearing protectors, when perform-

ing any service or maintenance.

6. Where replacement parts are necessary for peri-

odic maintenance and servicing, genuine factory

replacement parts must be used to restore your

equipment to original specifications. The manufac-

turer will not be responsible for injuries or dam-

ages caused by use of unapproved parts and/or

accessories.

8. A fire extinguisher

and first aid kit should

be kept readily acces-

sible while performing

maintenance on this

equipment.

9. Support the machine with wood blocking or safety

stands when changing tires or working beneath

the Clod Hopper. Do not use cement blocks.

10. When completing a maintenance or service func-

tion, make sure all safety shields and devices are

installed before placing unit in service.

Содержание 4240 CLOD HOPPER





















































































Результаты поиска

Содержание 4240 CLOD HOPPER

Отзывы:

HARRISTON INDUSTRIES 4240 CLOD HOPPER, Руководство оператора, Страница: 16 / 84

Результаты поиска

Содержание 4240 CLOD HOPPER

Отзывы: