HARRISTON INDUSTRIES 4240 CLOD HOPPER, Руководство оператора, Страница: 29 / 84

21
4 OPERATION
• Read and understand this Operator’s Manual be -
fore operating, maintaining, adjusting, or repairing.
• Stop machine, disconnect power lines, and wait for
all moving parts to stop before servicing, adjusting,
maintaining, repairing, or cleaning.
• If removed for servicing, install and properly secure
all guards and shields before operating.
• Keep hands, feet, hair, and clothing away from all
moving parts.
• Clear the area of bystanders, especially small
children, before starting.
• Using the jacks, raise the machine until the weight
is off the tires; then level the frame. If the machine’s
weight remains on the tires, the tires must be
chocked to prevent movement.
• Have a certified electrician provide electrical power
to the machine.
• Disconnect power lines or shut off power source
before opening panel or working on electrical com-
ponents. High voltage can cause electrocution.
• Do not stand between the hopper and any vehicle
backing up to the hopper. Keep others away.
• Keep the working area clean and dry.
• Review safety instructions annually.
• Make certain that you are in compliance with local,
state/provincial , and federal regulations regard-
ing transporting agricultural equipment on public
roadways.
OPERATING SAFETY
• Make certain that all wheels and tires are in good
repair and that tires are inflated to proper pressure.
Do not under-inflate or overinflate.
• Make certain that all wheel lug bolts are tightened
to proper torque specifications.
• Install the transport cylinder locks on the input
conveyor and secure.
• Add extra lights and use pilot vehicle(s) when
transporting during times of limited visibility.
• Wrap up and bind all electrical wires to the frame.
• Be sure that any necessary SMV (slow moving
vehicle) signs, reflectors, and lights required by
law are in proper place and are clearly visible to
all traffic.
• Be sure the tow vehicle has adequate capacity and
weight to safely tow the Clod Hopper.
• Be sure to positively hitch to the towing vehicle. Use
a retainer on the pin and a safety chain to assure
a safe hitch hook-up when transporting.
• Adhere to local regulations regarding maximum
weight, width, and length.
• Do not exceed 20 MPH (32 kph). Reduce speed
on rough roads and surfaces.
• Do not allow anyone to ride on the Clod Hopper or
towing vehicle during transport.
• Always use hazard flashers on the towing vehicle
when transporting.
4.1 TO THE NEW OPERATOR OR OWNER
The Harriston Industries 4240 Clod Hopper is de-
signed to quickly and efficiently separate dirt and
stones from potatoes. Be familiar with the machine
before starting.
It is the responsibility of the owner or operator to
read this manual and to train all other operators
before they start working with the machine. In
addition to the design and configuration of equip-
ment, hazard control and accident prevention are
dependent upon the awareness, concern, and
prudence of personnel involved in the operation,
transport, maintenance and storage of equipment
or in the use of facilities.
Follow all safety Instructions exactly. Safety Is
everyone's business. By following recommended
procedures, a safe working environment Is pro-
vided for the operator, bystanders and the area
around the workslte. Untrained operators are not
qualified to operate the machine.
Many features incorporated into this machine are the
result of suggestions made by customers like you.
Read this manual carefully to learn how to operate the
machine safely and how to set it to provide maximum
efficiency. By following the operating instructions in
conjunction with a good maintenance program, your
Clod Hopper will provide many years of trouble-free
service.