HARRISTON INDUSTRIES 4240 CLOD HOPPER Скачать руководство пользователя страница 17

Страница: 17 / 84

2.9 LOCK-OUT TAG-OUT SAFETY

Establish a formal Lock-Out Tag-Out program for

your operation.

2. Train all operators and service personnel before al-

lowing them to work around the unloading system.

3. Provide tags on the machine and a sign-up sheet

to record tag out details.

4. Do not service or maintain the Clod Hopper un-

less the power is turned OFF and disconnected.

Keep others away.

2.10 STORAGE SAFETY

1. Store the Clod Hopper on a firm, level surface.

2. If required, make sure the unit is solidly blocked up.

Use the jacks to stabilize and support the frame.

3. Make certain all mechanical locks are safely and

positively connected before storing.

4. Store away from areas of human activity.

5. Do not permit children to play on or around the

stored machine.

6. Lock out power by turning OFF at master control

panel or junction box and padlocking the door shut

to prevent electrocution or unauthorized start-up

of the Clod Hopper.

2.11 TRANSPORT SAFETY

1. Make certain that you are in compliance with local,

state/provincial , and federal regulations regard-

ing transporting agricultural equipment on public

roadways.

2. Make certain that all wheels and tires are in good

repair and that tires are inflated to proper pressure.

Do not under-inflate or overinflate.

3. Make certain that all wheel lug bolts are tightened

to proper torque specifications.

4. Install the transport cylinder locks on the input con-

veyor and folding conveyor before transporting.

5. Add extra lights and use pilot vehicle(s) when

transporting during times of limited visibility.

6. Wrap up and bind all electrical wires to the frame.

7. Be sure that any necessary SMV (slow moving ve-

hicle) signs, reflectors, and lights required by law

are in proper place and are clearly visible to all

traffic.

8. Be sure the tow vehicle has adequate capacity

and weight to safely tow the Clod Hopper.

9. Be sure to positively hitch to the towing vehicle.

Use a retainer on the pin and a safety chain to as-

sure a safe hitch hook-up when transporting.

10. Adhere to local regulations regarding maximum

weight, width, and length.

11. Do not exceed 20 MPH (32 kph). Reduce speed

on rough roads and surfaces.

12. Do not allow anyone to ride on the Clod Hopper or

towing vehicle during transport.

13. Always use hazard flashers on the towing vehicle

when transporting.

Содержание 4240 CLOD HOPPER





















































































Результаты поиска

Содержание 4240 CLOD HOPPER

Отзывы:

HARRISTON INDUSTRIES 4240 CLOD HOPPER, Руководство оператора, Страница: 17 / 84

Результаты поиска

Содержание 4240 CLOD HOPPER

Отзывы: