HARRISTON INDUSTRIES 4240 CLOD HOPPER Скачать руководство пользователя страница 55

Страница: 55 / 84

•

Store the Clod Hopper on a firm level surface.

•

If required, make sure the unit is firmly blocked

up.

•

Make certain all mechanical locks are safely

and positively connected before storing.

•

Store away from areas of human activity.

•

Do not allow children to play on or around the

stored Clod Hopper.

•

Lock out power by turning off master control

panel or junction box and padlocking the door

shut to prevent electrocution or unauthorized

start up of the Clod Hopper.

STORAGE SAFETY

4.9.2 REMOVING FROM STORAGE

When preparing to use the machine at the start of the

season, follow this procedure:

1. Move to the working area if appropriately.

2. Check

a. Electrical systems and hydraulic components.

b. All drive systems.

c. All hardware. Tighten as required.

3. Replace any defective components.

4. Go through the pre-operation checklist (Section

4.5) before starting.

4.9 STORAGE

8. Inspect each conveyor. Check the condition of the

rollers. Replace any if badly worn. Check the align-

ment of the conveyors. Align if required. Properly

tension each conveyor belt.

9. Touch up all paint nicks and scratches to prevent

rusting.

10. Select a storage area that is dry, level and free of

debris.

4.9.1 PLACING IN STORAGE

At the end of the season, the machine should be thor-

oughly inspected and prepared for storage. Repair or

replace any worn or damaged components to prevent

any unnecessary down time at the beginning of the

next season. Follow this procedure:

1. Check all rotating parts for entangled material.

Remove.

2. Turn the power OFF at the master electrical panel

and lock out.

3. Unplug and remove power cord from machine.

4. Thoroughly wash the machine using a pressure

washer to remove all dirt, mud, debris or residue.

5. Lubricate all grease fittings. Make sure all grease

cavities have been filled with grease to remove

any water residue from the washing.

6. Inspect all the hydraulic hoses, lines and fittings.

Tighten any loose fittings. Replace any hose that

is badly cut, nicked, abraded or separating from a

fitting. Replace any damaged components.

7. Inspect all the electrical cords, lines, junction

boxes and motors. Tighten any loose connec-

tions. Replace any cord that is badly cut, nicked or

abraded. Replace any damaged components.

Содержание 4240 CLOD HOPPER





















































































Результаты поиска

Содержание 4240 CLOD HOPPER

Отзывы:

HARRISTON INDUSTRIES 4240 CLOD HOPPER, Руководство оператора, Страница: 55 / 84

Результаты поиска

Содержание 4240 CLOD HOPPER

Отзывы: