HARRISTON INDUSTRIES 4240 CLOD HOPPER Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 84

HARRISTON INDUSTRIES 4240 CLOD HOPPER Скачать руководство пользователя страница 12

4

SAFETY

YOU

are responsible for the

SAFE

operation and

maintenance of your Harriston Clod Hopper.

YOU

must ensure that you and anyone else who is going
to operate, maintain or work around the Clod Hopper
be familiar with the operating and maintenance pro-
cedures and related

SAFETY

information contained

in this manual. This manual will take you step-by-step
through your working day and alerts you to all good
safety practices while operating the Clod Hopper.

Remember,

YOU

are the key to safety. Good safety

practices not only protect you but, also the people
around you. Make these practices a working part
of your safety program. Be certain that

EVERYONE

operating this machine is familiar with the procedures
recommended and follows safety precautions. Re-
member, most accidents can be prevented. Do not
risk injury or death by ignoring good safety practices.

•

Read and understand the Operator's Manual and

all safety signs before supplying power, operating,
maintaining or adjusting the Clod Hopper.

•

The most important safety device on this equip

-

ment is a

SAFE

operator. It is the operator’s

responsibility to read and understand

ALL

Safety

and Operating instructions in the manual and to
follow these. Most accidents can be avoided.

•

A person who has not read and understood all

operating and safety instructions is not qualified
to operate this machine. An untrained operator
exposes himself and bystanders to possible seri-
ous injury or death.

•

Do not modify the equipment in any way. Unau

-

thorized modification may impair the function and/
or safety and could affect the life of the equipment.

•

Think SAFETY! Work SAFELY!

2.1 GENERAL SAFETY

1. Read and understand the

Operator's Manual and all safe-

ty signs before supplying pow-

er, operating, maintaining or

adjusting Clod Hopper.

2. Only trained, competent persons shall operate the

Scale Conveyor. An untrained operator is not qual-

ified to operate this machine.

3. Provide a first-aid kit for use in

case of an accident. Store in a

highly visible place.

4. Provide a fire extinguisher for use in

case of an accident. Store in a highly

visible place.

5. Install and properly secure all guards

and shields before operating.

6. Wear appropriate

protective gear.

This list includes

but is not limited to:

- Protective

shoes with slip

resistant soles

- Protective

glasses or

goggles

- Heavy gloves

- Hearing protection

7. Turn machine OFF, shut down and lockout power

supply, relieve hydraulic pressure and wait for all

moving parts to stop before servicing, adjusting,

maintaining, repairing or cleaning. (Safety lockout

devices are available through your Harriston deal-

er parts department).

8. Know the emergency medical center number for

your area.

9. Review safety related items with all operators

annually.

«
...
10
11
12
13
14
...
»

Содержание 4240 CLOD HOPPER





















































































Отзывы:

Нет отзывов